Community Craft Day Challenge

Thread Status:
Not open for further replies.
  1. whoakashpatel
    Cupcake Apr 29, 2021

    Starcommander, buntycubal and SobinZz like this.
  2. paramjit2001
    Honeycomb Apr 30, 2021

  3. Santhosh_Ravi
    Ice Cream Sandwich Apr 30, 2021

  4. Iamhasannaqvi
    Ice Cream Sandwich Apr 30, 2021

    Stickied Post
    Iamhasannaqvi , via OnePlus 7 , Apr 30, 2021 :
    Here it comes the first project which I was working on. This Bullets wireless box was perfect to store my oneplus buds Z as well as Bullets wireless too. Here are few of the before pictures



    Here is the storage box that I made and OnePlus Magazine came in handy to give it OnePlus vibes.

    Bottom part is used as the top of the storage box and bottom part of the box where silicon case and extra ear tips were provided are used as actual storage compartment for OnePlus Buds Z and Bullets Wireless.

    Top lid that you can see here is actually a wallpaper used in OnePlus 3T.



    Hope you guys like it. Few more projects are yet to be completed. Will upload those too before submission date ends.
    Last edited: Apr 30, 2021

    Starcommander and SobinZz like this.
  5. Maddy0206
    Cupcake Apr 30, 2021

    Starcommander and SobinZz like this.
  6. Vinay_Rams
    Eclair May 1, 2021

    Stickied Post

    dsmonteiro, Starcommander and SobinZz like this.
  7. auto_parag
    Honeycomb May 1, 2021

    auto_parag , May 1, 2021 :
    There are some really interesting things posted here. Our community is very creative :) Kudos to all.

    Yash Pratap Singh. likes this.
  8. Overzee
    Moderator, The Showcase Reviewer Moderator May 1, 2021

    Stickied Post
    Overzee , May 1, 2021 :
    Thanks again @Leo X. for this great contest. I gave it all a good thought since the 21st of April, I finished it today and can't wait to share it with the community. It was a wonderful distraction, as we are in the middle of our quarataine period at home.

    I've always had a soft spot for docking stations for electronics: my iPod has a docking station to play music via the AV receiver, the remote control is charged in a docking station and I've actually wanted to 3D print a docking station for quite some time now, for my OnePlus 6T. Since this competition is about 'community craft', I went to see which materials I can use to make a new docking station, I soon came up with the idea to make one for my OnePlus Buds. Some time ago I bought the Amazfit Zenbuds and they came in a very nice box, this had to be the basis of my project. In addition to this box, I used the following materials: color samples for window decoration, polystyrene foam, old USB-A cable, old USB-C cable, some tape and two small bolts for fixing the cable. I used the following tools: a drill, drill bits of various sizes, tape measure, glue, pencil and my own imagination. Enough background info, here's the result:

    It was all so interesting my son couldn't resist not being in the picture with his beautiful Lego train.
    IMG_20210501_153138_001.jpg IMG_20210429_141319_Bokeh_001.jpg IMG_20210429_133950_Bokeh_001.jpg IMG_20210429_134055_Bokeh_001.jpg IMG_20210429_134504_001.jpg IMG_20210429_134543_Bokeh_001.jpg IMG_20210501_150716_001.jpg IMG_20210501_152704_001.jpg IMG_20210501_153256_001.jpg IMG_20210501_152755_001.jpg IMG_20210501_163438_001.jpg
    Last edited: May 1, 2021

    chosen1, cdnfarmer, Leo X. and 4 others like this.
  9. WASIM OnePlus
    Ice Cream Sandwich May 1, 2021

  10. buntycubal, Starcommander and SobinZz like this.

  11. buntycubal and Starcommander like this.
  12. Overzee
    Moderator, The Showcase Reviewer Moderator May 2, 2021

    Overzee , May 2, 2021 :
    Alright @Leo X., on the 5th day of my self-quarantaine I decided to start another (small) project with stuff lying in and around the house.

    Due to a recent news item where the Dutch Food and Consumer Product Safety Authority (NVWA) recommended that melamine plastic tableware in which bamboo and / or maize fibers are processed should not be used (anymore), I had to set aside some of our tableware. I found a nice way to reuse my coffee cup, and transform it into a tiny 'hanging basket' for some nice flowers. Who doesn't love a bit of colour in your life?


    IMG_20210502_144252_001.jpg IMG_20210502_151300_001.jpg IMG_20210502_144543_001.jpg IMG_20210502_144255_001.jpg
    Last edited: May 6, 2021

    buntycubal, Starcommander and SobinZz like this.
  13. Iamhasannaqvi
    Ice Cream Sandwich May 2, 2021

    Iamhasannaqvi , via OnePlus 7 , May 2, 2021 :
    Project Number 2 Phone Holder - This one is top part of Bullets Wireless. I simply made cut in centre and and placed another cardboard which was also in the box of Bullets Wireless. And painted it with some acrylic colors.




    buntycubal, Starcommander and SobinZz like this.
  14. Iamhasannaqvi
    Ice Cream Sandwich May 2, 2021

    Iamhasannaqvi , via OnePlus 7 , May 2, 2021 :
    Project Number 3 Flower Pot - This is made out of OnePlus Buds Z box's bottom part. This one was quite simple to make though. Hope everyone likes it.



  15. Maruf_Reza
    Eclair May 3, 2021

  16. Iamhasannaqvi
    Ice Cream Sandwich May 4, 2021

    Iamhasannaqvi , via OnePlus 7 , May 4, 2021 :
    Project Number 4 Phone Charging dock - This one is made out of OnePlus power bank box.
    First of all I cut the box in half and gave a shape and then I placed tissue paper and applied glue paste to hold it together. And lastly I painted it with acrylic paint and added some spring vibes.




    buntycubal and Starcommander like this.
  17. WASIM OnePlus
    Ice Cream Sandwich May 4, 2021

  18. Itjayesh
    Gingerbread May 5, 2021

    Itjayesh , via OnePlus 9 , May 5, 2021 :
    I use my oneplus box a side table box like I keep it on my side table and then use it as a storage box and ya the oneplus buds box is basically my storage for cards and small imp stufff..

    Sorry couldn't share images as I am not at home. Hoep to get your hasselblad postcard box.

  19. Dhruv Kashyap
    KitKat May 5, 2021

    Stickied Post
    Dhruv Kashyap , May 5, 2021 :
    Hello, everyone!
    I hope you and your family are keeping safe in these difficult times.

    First of All, thank you @Leo X. and team for introducing such a fantastic contest. This one not only refreshed my mind but also, I was able to make a personalized gift for my mom 😊

    1. Jewelry Box
    Recently, my parents had their marriage anniversary. Dad’s gift was already home, but due to the lockdown restrictions, Mom’s Gift was stalled. So, I made a Jewelry Box for her 😊

    Among the many options of boxes,

    I started with this famous OnePlus Box (from my 8T’s delivery)

    The Box’s Flaps were cut and pasted inside the box after a few modifications for holding bangles. Then I used cardboard pieces and spare craft papers to make Stick for Bangles.
    upload_2021-5-5_14-51-36.png upload_2021-5-5_14-51-38.png upload_2021-5-5_14-51-40.png

    As it was a gift, I tried to decorate it a little.
    upload_2021-5-5_14-51-53.png upload_2021-5-5_14-51-56.png

    Added an extra slab for the earrings and re-used a gift wrap and some decorative tape to cover it from the sides.
    upload_2021-5-5_14-53-50.png upload_2021-5-5_14-53-55.png

    Finally, I added the Jewelries to it and showed it to my mom.
    upload_2021-5-5_14-54-25.png upload_2021-5-5_14-54-59.png


    2. Thread and Sew Box

    Pretty much every household in India has a thread box. For this contest, I tried to recreate the same, but with a Twist: Using OnePlus Bottle Box!

    Started with the iconic red OnePlus Bottle Box and one more cardboard box
    upload_2021-5-5_14-56-0.png upload_2021-5-5_14-55-57.png

    Cut the bottle box from one side vertically and two sides horizontally to create a flap. Then covered these flaps with rough while papers and fixed them inside the bottle box using some tape.
    upload_2021-5-5_14-56-31.png upload_2021-5-5_14-56-35.png

    This helped in making small compartments for various items. Finally, attached a button and woolen strap for opening and closing of the box. And, Done! (It was not that easy as it looks like, lol :sweatsmile:)
    upload_2021-5-5_14-57-54.png upload_2021-5-5_14-57-56.png


    The thread rolls, scissors, and buttons went into their dedicated places, and a lightweight thread box was ready 😊 :D


    Attached Files:

    Last edited: May 5, 2021

    ice1616, SRD., Starcommander and 3 others like this.