OnePlus 6T 3D Tempered Glass Screen Protector

  1. AllMight Froyo Dec 6, 2018

    AllMight, Dec 6, 2018 :
    Okay, so I have installed this screen protector, and I gotta say that after I got this on perfectly, I don't know why you would by anything else. It's fingerprint resistant. Very smooth to the touch with no noticable resistance. I did have to register my fingerprint again, but that only makes sense. The black edges align perfectly with the edge of the screen.

    ChrisX0z likes this.
  2. ChrisX0z Froyo Dec 6, 2018

    ChrisX0z, Dec 6, 2018 :
    Thank you so much for giving us the feedback, love the level of detail you have provided and I'm sold!
    Did you use the bumper case that came in the box to align it like the video demonstrates?

    And no noticeable screen loss from the edges?

  3. AllMight Froyo Dec 6, 2018

    AllMight, Dec 6, 2018 :
    I did it without the bumper. I made sure my phone was clean all around prior. The bumper case would be more than an appropriate guide though. I have an official one plus case that I use instead of the bumper that comes with it.

    ChrisX0z likes this.
  4. ChrisX0z Froyo Dec 6, 2018

    ChrisX0z, Dec 6, 2018 :
    Awesomesauce, same here i have the carbon case.
    One last question would be did you happen to notice e response time difference between the time before you installed the glass to now with the glass on.

    I'm sure others might find this information helpful and we thank you for sharing.

  5. AllMight Froyo Dec 6, 2018

    AllMight, Dec 6, 2018 :
    It's seemed like the response is smoother. I have not necessarily noticed any slower response times, I actually feel like it recognizes my touches a little better.

    ChrisX0z likes this.
  6. K1544107534471 Cupcake Dec 6, 2018

    K1544107534471, Dec 6, 2018 :
    I'm looking at getting a new screen protector, as well as, a new case for my 6T. I'm a new user, have had the phone for 3 weeks now? anyway, i noticed that the phone has a screen protector on it, out of the box. and I'm still using the bumper case that came with the phone. my question, will I remove the current screen protector on it, or place this 3d glass protector on top of the one that came installed bon the phone?

  7. K1544107534471 Cupcake Dec 6, 2018

    K1544107534471, Dec 6, 2018 :
    noticed your case with the "G"oogle logo. which case is that? looks dope with the "G". and does the logo come on the case?

    ChrisX0z likes this.
  8. ChrisX0z Froyo Dec 6, 2018

    ChrisX0z, Dec 6, 2018 :
    Remove the screen protector already applied before you install the glass.
    And thanks lol it's the carbon bumper case & the "G" is a sticker i grabbed from work and slapped it on

  9. K1544107534471 Cupcake Dec 6, 2018

    ChrisX0z likes this.
  10. ChrisX0z Froyo Dec 10, 2018

    ChrisX0z, Dec 10, 2018 :
    So i have the carbon case, i rather have the case for overall protection & the glass to prevent further damage from a face fall.

  11. Q_Prime Donut Dec 10, 2018

    Q_Prime, Dec 10, 2018 :
    Thanks dude I deleted the post coz I've read the previous posts and realised you guys already answered my question XD plus a lil embarrassed coz i thought no one would see it!

    ChrisX0z likes this.
  12. ChrisX0z Froyo Dec 13, 2018

    ChrisX0z, Dec 13, 2018 :
    Hey guys just wanted to give you guys the feedback you desire!

    Just got my glass in today and i gotta say I'm impressed with the quality and the "3D" effect it adds. To me it's hard to notice plus some may not like it but the thickness of the glass gives your display the illusion that it's sitting further back so it makes certain perspectives pop.

    The feels are amazing and i did not have to re register the fingers but i did it to test the response time to see if it causes any delays & it's surprisingly a bit quicker.

    The install was definitely a good fight, the video doesn't demonstrate how annoying it is to get your edges bubble free. Though using the case helps with alignment and the soft brim of the tpu makes it super easy.

    Tip take your micro fiber and fold it over the squeegee and hold it tight while you push the bubbles out. And go easy on pressure when you get to the edges to prevent more bubbles populating.

    Again thank you for all the input and hopefully everyone finds this info helpful and instructive


    Q_Prime likes this.
  13. Q_Prime Donut Dec 13, 2018

    Q_Prime, Dec 13, 2018 :
    The only thing which is putting me you off at the moment is dufficulty of the installation but I'll still purchase it. You from the UK? Got some questions regarding the delivery and the charges that go with it.

  14. ChrisX0z Froyo Dec 13, 2018

    ChrisX0z, Dec 13, 2018 :
    I'm in the US, you can check before you finalize the purchase.

    Q_Prime likes this.
  15. Danmccabe Froyo Jan 1, 2019

    Danmccabe, Jan 1, 2019 :
    has anyone tried it with a tech21 Evo check case or other after market one which is not made by one plus?

  16. ChrisX0z Froyo Jan 6, 2019

    ChrisX0z, Jan 6, 2019 :
    So i wanted to update everyone on this product.
    After a few months i noticed that bubbles were forming on the edge.
    Idk if it's an issue or just because it's in and out of my pocket but i just took mine off because it was bothering me and eventually it'll get worse

    Q_Prime likes this.
  17. Q_Prime Donut Jan 6, 2019

    Q_Prime, Jan 6, 2019 :
    same got a few bubbles two of them are on the edges, but I'll keep mine on still, I'd rather have the protection

    ChrisX0z likes this.
  18. ChrisX0z Froyo Jan 24, 2019

    ChrisX0z, Jan 24, 2019 :
    So believe it! Oneplus sent me a new glass for free!
    Hopefully this one won't bubble on me.