2
Re-glue Screen on OnePlus3T

  1. egrealis
    Cupcake Dec 4, 2019

    egrealis , Dec 4, 2019 :
    Hi there-

    Any suggestions/guides out there for re-glueing the screen on a 3T?

    The screen itself is perfect so I don't need to replace that, but after three years its starting to come away from the main unit. After an extensive youtube search i stlll haven't been able to find a guide to doing this as the guides are typically about replacing the screen. Can anyone recommend an adheasive at least?

    Thanks in advance,
    Eoin
     

    #1
    Starcommander and Planfix like this.
  2. mohd_areeb
    Honeycomb Dec 4, 2019

    mohd_areeb , via OnePlus 3T , Dec 4, 2019 :
    get that black rubber adhesive glue, but first you need to completely take off the display from the main body, clean the surface then re+glue it and paste firmly, and apply rubber bands vertically and horizontally! as much as possible for atleast 1 hour.
     

    #2
  3. Infosumit01
    Gingerbread Dec 9, 2019


    #3
  4. Planfix
    Cupcake Dec 9, 2019


    #4
  5. Planfix
    Cupcake Dec 9, 2019

    Planfix , via OnePlus 3 , Dec 9, 2019 :
    Sadly not avaliable in my city
     

    #5
  6. rmendez011
    Gingerbread Dec 9, 2019


    #6
  7. Planfix
    Cupcake Dec 9, 2019

    Planfix , via OnePlus 3 , Dec 9, 2019 :
    Screen popping out from phones body.
     

    #7
  8. rmendez011
    Gingerbread Dec 10, 2019

    rmendez011 , Dec 10, 2019 :
    That's really Vague. Doesn't really tell me much without seeing the issue.
     

    #8
  9. Starcommander
    Lollipop Dec 10, 2019

    Starcommander , Dec 10, 2019 :
    Screenshot_20191210-072543.jpg
    This was common with oneplus 3 devices
     

    #9
    virus streaming and G_plusone like this.
  10. Starcommander
    Lollipop Dec 10, 2019

    Starcommander , Dec 10, 2019 :
    I did self repair by using double sided tap 2mm from Amazon
     

    #10
  11. rmendez011
    Gingerbread Dec 10, 2019

    Attached Files:


    #11
    Starcommander and G_plusone like this.
  12. kallum67
    Cupcake Dec 10, 2019


    #12
  13. Starcommander
    Lollipop Dec 11, 2019


    #13
    rmendez011 likes this.
  14. rmendez011
    Gingerbread Dec 11, 2019

    rmendez011 , Dec 11, 2019 :
    Hopefully that double sided tapes lasts!
     

    #14
    Starcommander likes this.
  15. Starcommander
    Lollipop Dec 11, 2019


    #15
    rmendez011 likes this.
  16. Starcommander
    Lollipop Dec 11, 2019

    Starcommander , Dec 11, 2019 :
    Hey if anyone uses this, mind that the ribbon cable placement needs sufficient space without adhesive. I applied the double sided tape in the entire back panel, place the screen on the frame and tried to connect the ribbon cable to motherboard.
    Bam!
    The cable needs more space. I had to reopen the screen using dryer.
    Take care to cut an appropriate slot in the tape!
     

    #16
    rmendez011 likes this.
  17. rmendez011
    Gingerbread Dec 12, 2019

    rmendez011 , Dec 12, 2019 :
    I would assume that double sided tape I sent is thin enough to not cause that since it's "OEM"
     

    #17
    Starcommander likes this.