303
[Tool] JOxygenOS Installer - Flawlessly clean install OxygenOS & COS12

  1. Jaxsky
    Froyo Apr 6, 2015

    Jaxsky , Apr 6, 2015 :
    Hi James thank you for your reply. I will message you tomorrow. It was messy....very messy but that was me and not the install I don't think. Hopefully you can offer some guidance?!
     

    Jamesst20 likes this.
  2. Jamesst20
    Jelly Bean Apr 7, 2015

    Jamesst20 , Apr 7, 2015 :
    Sure but if I were you, instead of going into developer options and enabling USB debugging, you could reboot manually your phone in Fastboot mode.

    To reboot in fastboot mode, here are the steps :

    1. Disconnect your phone [Very important]
    2. Hold power button for about 10 second and release it.
    3. Quickly hold Volume UP (first) + Power for about 3 seconds and you should see Fastboot mode written on your device.
    4. Connect it back to PC.

    You can do the same after the device reboot when the bootloader is being unlocked.

    Also, please make sure your drivers are properly installed otherwise the tool will not detect your phone.

    Keep in mind, it doesn't matter at what steps the tool fail, it's never going to brick your phone
     

  3. OM3GA67
    Donut Apr 7, 2015

    OM3GA67 , Apr 7, 2015 :
    Thats a good idea, make it more simple like the instructions to jailbreak apple devices. actually you could even download redsnow and maybe look at the things they offer and make an android alternative
     

  4. Jamesst20
    Jelly Bean Apr 7, 2015

    Jamesst20 , Apr 7, 2015 :
    Well not exactly because Redsn0w is unable to turn an iPhone in DFU mode where my tool is
     

  5. Jamesst20
    Jelly Bean Apr 7, 2015

    Jamesst20 , Apr 7, 2015 :
    Maybe all of you will be lucky soon


    [​IMG]
     

    shivamshah1733 and zorolfo like this.
  6. shivamshah1733
    Gingerbread Apr 7, 2015


  7. mwebsterpgh
    KitKat Apr 7, 2015

    mwebsterpgh , Apr 7, 2015 :
    I agree. OnePlus should not have released without a tool kit. You really have to spend time to learn all the tricks of the trade.
     

  8. ianyeo
    Honeycomb Apr 7, 2015


    shivamshah1733 and Jamesst20 like this.
  9. TeamValor91
    Community Veteran Apr 7, 2015


    Jamesst20 likes this.
  10. Jamesst20
    Jelly Bean Apr 7, 2015

    Jamesst20 , Apr 7, 2015 :
    Wow ! Thanks you very much ! I was about to release in a minute (when the permissions bug goes a way so I can edit my thread) to release the v1.1 version including Mac OS X Support
     

    TeamValor91 likes this.
  11. Jamesst20
    Jelly Bean Apr 7, 2015

    Jamesst20 , Apr 7, 2015 :
    @traxtopel @shivamshah1733 @zorolfo

    Mac OS X version has arrived ! Please let me know if you run into issues, I have tested it under VMWare but it was extremely slow which makes debugging hard. Seems to work flawlessly though after 10+ full flashing successful in a row.

    Changelog

    Version 1.1
    • Better error handling
    • Better error explanations
    • Improved stability
    • Mac OS X support (tested under Yosemite)
    • Corrected internal tutorial for sideloading.
    • Minor bug fixes
     

    iyousif likes this.
  12. shivamshah1733
    Gingerbread Apr 7, 2015


  13. shivamshah1733
    Gingerbread Apr 7, 2015

    shivamshah1733 , Apr 7, 2015 :
    I'm really on the edge about installing Oxygen OS. I need a really good daily driver....

    I've read the pro/cons and might just wait until cm12s.

    Can you create a tool which automagically upgrades from cm11s to cm12s (when it comes.. out).

    @Jamesst20
     

  14. goouvw
    Cupcake Apr 7, 2015


  15. trueblue2
    Froyo Apr 7, 2015

    trueblue2 , Apr 7, 2015 :
    Very, very cool.. :)
     

  16. Jamze
    Ice Cream Sandwich Apr 7, 2015

    Jamze , Apr 7, 2015 :
    Hi James. Any thoughts what happened to mine? Ran your tool, it failed a couple of times, never got to TWRP, phone just kept starting up normally. Followed your guidance on drivers, worked, did the sideload, got to extracting package and suddenly displayed an error and stopped. Phone now wouldn't start, so I reflashed CM11 using some other guidance on here. Ended up following some instructions that reverted to Color OS before flashing CM11 - so now got the red logo on boot up and more issues to sort (doesn't recognise my SIM). Any ideas appreciated! Would either like to get it fully back to stock or Oxygen OS...
     

  17. jphong8
    Cupcake Apr 7, 2015

    jphong8 , Apr 7, 2015 :
    Hi everyone, I used the toolkit and my phone is currently stuck on the Oxygen OS boot logo I can still access TWRP but TWRP states I have 0 internal memory. I can also access fastboot mode. Does anyone know how to fix this? Thanks in advance.

    [​IMG][​IMG]
     
    Last edited: Apr 7, 2015

  18. neme81
    Donut Apr 7, 2015

    neme81 , Apr 7, 2015 :
    @Jamesst20 thank you very much i've just switch to oxygen with your tool ,that work fine.
    I hope also your tool support oxygen to cm12 because with oxygen there is no reason why I have abandoned the nexus :p
     
    Last edited: Apr 7, 2015

    Jamesst20 likes this.
  19. Bennetleriche
    Froyo Apr 7, 2015


  20. manshyworld
    Ice Cream Sandwich Apr 7, 2015