0
"Unfortunately, System UI has Stopped" OPO

  1. telsta04
    Cupcake Sep 2, 2016

    telsta04 , Sep 2, 2016 :
    My OPO just keeps going from one program to another, it keeps getting " Unfortunately, System UI has Stopped, on the screen, if I can get to a screen to do something it goes to the next app or program, the flashlight comes on and off, it looks like it enters new text messages and the calendar is always on. I've gotten it to boot into safe mode but the same routine all over again. I have all of my pictures backed up so if some how I could reset it back to factory setting it wouldn't bother me, any suggestions?
     

    #1
  2. celtare21
    Eclair Sep 2, 2016

    celtare21 , Sep 2, 2016 :
    1. Download the factory image: https://1drv.ms/u/s!Am2AoH2dCZQbymjCZfPrAPV1eLbL
    2. Connect your phone to your pc
    3. Open a cmd where you have extracted the archive and input the following commands: (or just run flash-all.bat if you don't care about the internal storage)
    fastboot flash modem NON-HLOS.bin
    fastboot flash sbl1 sbl1.mbn
    fastboot flash dbi sdi.mbn
    fastboot flash aboot emmc_appsboot.mbn
    fastboot flash rpm rpm.mbn
    fastboot flash tz tz.mbn
    fastboot flash LOGO logo.bin
    fastboot flash oppostanvbk static_nvbk.bin
    fastboot flash recovery recovery.img
    fastboot flash system system.img
    fastboot flash boot boot.img
    fastboot flash cache cache.img
    fastboot flash userdata userdata_64G.img -- If you input this it will wipe your internal storage
    fastboot reboot
    4. Enjoy :)
    Credits and original posts: Restore stock: http://forum.xda-developers.com/oneplus-one/general/guide-return-opo-to-100-stock-t2826541
    : Minimal adb and fastboot: http://forum.xda-developers.com/showthread.php?t=2317790
     

    #2
    pa5t1s likes this.
  3. gringoboy
    Lollipop Sep 2, 2016

    gringoboy , Sep 2, 2016 :
    Switch phone off. Hold volume down and power button at the same time until it vibrates, about 3 or 4 secs. Recovery screen will appear. Choose factory reset. Done.
     

    #3
    pa5t1s likes this.
  4. pa5t1s
    User of the Year 2014 Sep 2, 2016

    pa5t1s , Sep 2, 2016 :
    Lol
     

    #4